PGP beton filler

Advantages:

• Ready mixed formula
• Reinforced with ceramic microspheres
• Very elastic
• Fills easily uneven breaks
• Excellent surface adhesion properties
• Dries fast and can be easily sanded
• Presents low shrinkage – does not crack
• Excellent mould resistance
• Paintable
• Interior and exterior use

Applications:

• Fills cracks up to 6cm deep and 2cm wide as well as concrete irregularities
• It is suitable for concrete surfaces, plaster, plasterboards, cementboards, wood, bricks, stone etc.

Instructions for use:

• Surfaces must be dry and clean from dust, grease and loose particles and other contamination
• For deeper cracks or joints application of water-based acrylic primer is necessary
• Apply with a spatula or spreader
• Press the filler onto the surface to a maximum depth of 3mm
• For deep cavities apply fiber or plastic reinforcing net
• Fill hole proud to allow for sanding and finish with a wet knife
• Once dry, sand to a smooth finish
• The final surface may be primed and painted
• Close lid immediately after use to prevent drying
• It is advisable to perform a suitability test prior to full scale application

Remarks:

• Do not use to fill plastics or metals
• Do not apply externally when rain is imminent (within 5 hours of application)
• Do not apply at temperatures (ambient and surface) below 5°C
• Not suitable for repairs to permanently wet areas