Super lite

Advantages:

• Fills all cracks in one go – No need to build up layers of filler
• Easy to use – lightweight paste is easy to apply
• Quick drying – ready to paint/prime in 30 minutes – 1 hour
• Sanding is not required – finishes to a smooth finish
• No sagging
• Non-shrink
• Interior and exterior use
• Rapid and clean application

Applications:

• It is suitable for quick and easy preparation of surfaces prior to painting as well as filling cracks of interior and exterior surfaces.
• It is suitable for plaster, smooth concrete surfaces, brick, stones, render, wood, plasterboard, cement board and much more.

Instructions for use:

• Surfaces must be dry and clean from dust, grease and loose particles and other contamination
• Apply with a spatula or spreader
• Press the filler onto the surface - hole.
• Smooth over surfaces with spatula or knife
• Sanding is not normally required, although if needed it can be sanded
• The final surface may be primed and painted
• Close lid immediately after use to prevent drying
• It is advisable to perform a suitability test prior to full-scale application

Remarks:

• Do not use to fill plastics or metals
• Do not apply externally when rain is imminent (within 5 hours of application)
• Do not apply at temperatures (ambient and surface) below 5°C
• Not suitable for repairs to permanently wet areas