Isomix art & craft

Advantages:

• Excellent surface adhesion properties
• Extra strong
• Easy to use - just added to water
• Homogenous paste texture
• Controlled setting
• Easily sanded
• Very low shrinkage
• Can easily be painted
• High plasticity

Applications:

• Construction of plaster ornamental objects
• Construction of cast made products
• Construction of hand-made artifacts
• Construction of molds

Surface preparation:

• Clean thoroughly the mold or the surfaces on which ISOMIX ART & CRAFT plaster will be applied.
• If plaster is going to be applied on a surface, make sure that the surface is firm and can withstand loads.
• Moisten the application surface.

Mixing instructions:

• For the preparation of the mixture of the molding and casting plaster ISOMIX ART & CRAFT, empty approximately 2 parts of plaster into 1 part of clean water, pouring the plaster powder slowly. Then stir carefully, until the mixture is homogenized and lump free. Never pour the water in the plaster powder, always pour the powder in the water.

Application:

• Finished plaster can be casted in molds for approximately 4 to 15 minutes after mixing.
• For spatula or trowel applications, workability is 10 - 30 minutes after mixing.
• After it is completely dry, the plaster can be painted.

Useful information:

• The final whiteness of ISOMIX ART & CRAFT casting and molding plaster is achieved when the product is completely dry.
• New objects should not be subject to strain for at least 24 hours.
• Consumption depends on each specific application.